cubegroupq8.com

Complete Guide On Setting-Up Electrical Conduits

by

jeson

An electrical conduit is set up to path and shield the electrical wires cable to the point of service. These electrical conduits will at some point run undetectable in the wall or possibly at times they are clamped on the wall. While fitting an electrical conduit there are several tools which are required to assure proper installation. To better know the tools that would be required, let\’s also understand the process of installation of electrical conduits.

Installation procedure and the tools required

To ensure that we\’ve got the perfect size of electrical conduit pieces, the first step is to measure the diameter of the hole, the size of the run of the conduits between two holes or else between 2 turns. Using a vernier caliper will be the best way to measure the diameter of the hole while for measuring the run between the two holes, we could use a simple measuring tape.

It is crucial that we keep a safety margin, while establishing the size of the conduits to account for loss as a result of cutting of the conduits. Keep in mind we may require to cut the conduits at turns, only when we\’re using a non-flexible conduit, while flexible conduits could run across the channel without giving any cuts.

There are special conduit cutting resources available on the market for the purpose of cutting the conduits. The choice of equipment would differ based on the material of conduit (metal or simply non-metallic) and even the flexibility (rigid or flexible). A PVC or a flexible conduit can be cut with a hacksaw. Other way to cut is to use the conduit cutter, clamp it around the conduit and tighten the knurled nut, and simultaneously push the cutter around the conduit. Make sure that you cut the conduit at ninety degree to the axis and even make sure to file the edge to eliminate any burr (sharp edge) that mostly happens after cutting. If you don\’t take away the burr, it can cause the insulation to cut, while you are drawing electrical wire through the conduit. This method of taking out the burr is known as reaming and there are several equipment to do that like a rat tailed file, pipe reamer or even a pair of pliers.

Once you have properly cut the conduit, the job now is to do the threading, so that the pieces of conduit can be connected / coupled using an elbow or even coupler or simply a similar joint. To do the threading use a ratchet type of die (for smaller pipes) or even hand held portable threading machine.

If you want to cut the conduit, as sometimes it might not be affordable, you may as well bend the conduits. To do the same there are bending tools available. These bending tools are so designed that they keep up with the internal dimension of the conduit and so do not cause any damage, even after inducing a bend.

After the conduits are set up, a fish tape or maybe linesman plier may be used to draw stranded or maybe solid electrical wire through the conduit.

As the job of installing electrical conduits is a complex one and needs the use of a lot of tools it may be better to source your electrical wires, electrical conduits and other electrical supplies carefully and from a reputed supplier.

Jeson Pitt has written several articles on how to source electrical supplies. In this article, he discusses tools required for the installation of

flexible conduit fittings

along with the process of installing electrical conduits. He further emphasizes on sourcing electrical wires, conduits and other electric supplies carefully to ensure safety.

Article Source:

ArticleRich.com